不銹鋼材料裝飾管嗎1.4313是馬氏體級，耐金屬浸蝕高朝，熱辦理后耐用度性好。X3CrNiMo13-4鋼的機誡化性是因檢查是否成份中鉬和鎳的高水分含水量。以上合金材料使用劑控制了不斷增加級碳水分含水量的要——給定質量濃度相同于奧氏體不銹鋼材料裝飾管嗎。即便是鎳水分含水量低，但鎳水分含水量約為4%，相關性提生了鋼對幾種金屬浸蝕區域的驅散力——首次機誡化性。X3CrNiMo13-4鋼業主可的生產銷售達到300℃在溫濕度下運作的產品圖和產品圖，、體現在幾種金屬浸蝕區域中的產品圖，一起穩定任何的外表面經濟前提條件括抗氯化物屬性)。QT650.QT780和QT900經濟前提條件下，熱辦理后最喜歡竣工鋼材。半原料用作是由的生產銷售.精細化工.在冶金機械和燃料互聯網行業，齒輪機體現在高溫暖較低溫度下.泵.縮短機器件。鋼不合焊。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50提供EN1.4313馬氏體不銹鋼材質的有固溶處理基本特性（+A）模式、蘸火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，是需要哪有一個一定程度要跟工作說清析哦。