1.4404–X2CrNiMo17-12-2–AISI/SAE316L1.4404或316L奧氏體不銹鋼材料AISI是因為其鉻和鉬含氧量高，碳含氧量低，316型具備有優良的耐的腐蝕性。相對大直徑，蘸火強度約為600MPa，不過相對小橫截面，能夠 采用螺母化來提升 。不銹鋼板有許多種通過率的貨存主要來源，還有有所差異的品牌制式或程序，使您也同樣也可以最后地實現您的施行需要。各位的服務性中心的也同樣也可以定制開發或切為一塊塊。阿拉伯數字名稱大全：W、 號1.4404–1.4401（316）–US S31603–316L標準規范：ISO7153-1、ASTM F899、NF S94-090、NF EN 10088-3和-2、ASTM A479、ASTM A276、X2CrNiMo17-12-2–AFNOR Z3CND17-11-2–BS 316S31

MATERIAL SPECIFICATIONS:BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C(％): ≤0.030Si(％): ≤1.00Mn(％):≤2.00P(％)≤:0.045S(％)≤:0.030Cr(％): 16.5～18.5Ni(％): 10.0～13.0Mo(％):2.00～2.50Other(％): N≤0.11

MECHANICAL PROPERTIES( BAR/WIRE ROD ) AND INTERGRANULAR CORROSION RESISTANT TENDENCYVIASOLUTION TREATMENT

Thickness Diameter (d)/≤mm: 160Hardness HBS: 215Yield strength σ0.2≥/MPa: 200Tensile strength σb/MPa: 500～700Elongation δ(longitudinal )≥(％): 40Elongation δ(transversal )≥(％): -Impact absorbing energy Akv≥/J|longitudinal: 100Impact absorbing energy Akv≥/J|transversal: -Intergranular corrosion resistance tendency | condition of delivery: YesIntergranular corrosion resistance tendency | condition of welding: YesThickness Diameter (d)/≤mm: 160<d≤250Hardness HBS: 215Yield strength σ0.2≥/MPa: 200Tensile strength σb/MPa: 500～700Elongation δ(longitudinal )≥(％): -Elongation δ(transversal )≥(％): 30Impact absorbing energy Akv≥/J|longitudinal: -Impact absorbing energy Akv≥/J|transversal: 60Intergranular corrosion resistance tendency | condition of delivery: YesIntergranular corrosion resistance tendency | condition of welding: Yes大部分應用諸多運用有機戒、化工機械、頁巖油、時鐘、林果業軟件和醫遼器材服務行業的軟件。那樣用料能夠適用大直徑不低于或小斷面的超高頻淬火(固溶處理)的情形。